Product Classification
Torque Equipments
Force Equipments
Pressure Equipments
Tension Measure Equipments
Digital Indicators
Crane Safety Equipments
Testing Machines
Strain Measurements
Strain Gauging Services
Stress Coat / Brittle Coatings
Special Equipments
Product Catalogue

Download Catalogue
Calibration & Testing
Quick Contact
C-24, Shivalik, New Delhi
Pin - 110017, India.
T: 91 11 26673108
F: 91 11 26683970
Product :: Digital Bottle Cap Torque Tester [ Send Enquiry ]

Hytech Micro Measurements, manufactures a series of Torque Testers designed and developed for use in Quality assurance, sample testing & ultimate strength test of hand tools and calibration of torque wrenches.

Bottle cap must be tightened properly otherwise the cap may leak or if tightened too much, the cap may be damaged. The cap seal should also be designed to break open only at a specified torque. For checking these specifications, a digital Opening Torque tester is required.

“DIGITAL BOTTLE CAP TORQUE TESTER” is a specially designed system, manufactured & supplied to you as a solution for checking the opening torque of a bottle cap, seals and corks.
Technical Specifications
Avaliable Ranges 1 Nm, 2 Nm, 3 Nm, 5 Nm, 10 Nm, 20 Nm
Accuracy ± 0.5% of F.S.D or ± 2% of reading from 10% to 90%
Display 4 ½ Digit LED/LCD Backlit Display
Operates On 230V A.C. Supply
Jaw Diameter Range 20 – 200 mm
Special Features
20-200 mm diameter Bottles or Jars can be tested
Choice of different units such as Kgf-m, N-cm, Lb-in
Has an accuracy of ± 0.5% of FSD or 2% of reading from 20% to 100% of the rated capacity
Peak hold facility
Operates on A.C. Main supply
It can measure clockwise and counter clockwise values
Facility to set upper and lower limit values
Audio and visual signal through buzzer and LED indication
Facility to tare the initial torque
Digital display, clear and easy to read
Can be twisted / turned in clock-wise or anti-clockwise directions, and measure torque force
Lock up the Maximum Torque value
Unit can be switched freely from Nm to Kgf-cm, Lbf-in
Rechargeable battery
Optional Features
RS-232 facility to hookup with the computer
Memory of up to 100 data can be stored
Analog output facility is optional
Over load alarm
© copyrights reserved Hytech Micro Measurements Pvt. Ltd.